所在位置:首页 > 技术支持
高空平台车技术支持
购买Holland Lift剪式升降机的10个好理由
1
Bronze bearings in combination with a double hardened chrome-plated axle provide a very small wear and a long lifetime. The average lifetime is longer than 10 years.
青铜轴承与双硬镀铬的轴结合提供一个非常小的磨损和一个很长的寿命。平均寿命超过10年
2
The pipes of the hydraulic system have been reinforced at critical points.
液压系统的管道在关键部分被强化。
3
All scissor joints have a tight tolerance and a single axle. The patented scissor design ensures maximum stability in the elevated position. Moreover the centre of gravity of the whole construction is at a very low position.
所有关节都有一个轴承和很好的公差配合。专利剪式设计能确保提高的位置的最大稳定性。而且结构的重心是在一个非常低的位置
4
The hydraulic system has been constructed with reliable and robust components. Some of the systems handle pressures up to 400 bar (5801 Psi).
液压系统采用可靠牢固的组成部件。一些系统可承受压强多达400 bar(5801 Psi).
5
Unique working height. The G-320DL30 4WDS/N brings you to a working height of 34.0 meters.
工作高度。G-320DL30 4WDS/N把你带到工作高度为34.0米的地方
6
Durable finishing of the steelwork and the scissor. Nearly all components of the scissor lift have been powder-coated. The axles and locking-rings have been yellow passivated.
最后完工的是坚固耐用的剪叉式钢结构,几乎所有剪式升降机的部件都是喷漆的。轴承和轴承吊环被标记成黄色。
7
Where possible standardised components have been used in the construction of the lifts. Components, which are available everywhere.
升降车的结构中只要是可能用标准化部件的地方,标准化部件无处不在
8
The scissor lift has been made for your application. It is possible to construct or to adapt a scissor lift to customer specifications.
剪式升降机按照您的需求而制造,它可以适应客户的需求
9
A service organisation, which helps you with preventive maintenance, repairs, retrofits and revisions. Besides there is a next-day part service for most common spare parts.
一个服务组织,帮助你预防维护、修理、更新和修改。此外还有一个为最常见的备件所设的next-day服务。
10
All scissor lifts comply with the standard EN 280.
所有剪式升降机遵从EN280标准